Mesh Belt Dryer For Briquettes
Capacity
custom
Heat Source
Diesel/Gas/Etc.
Customized
Yes
Charcoal briquette mesh belt dryer is a drying equipment that uses steel mesh as a conveyor belt to carry materials for continuous drying. The main heating methods include electric heating, steam heating, and hot air heating. Since the conveyor belt is mesh-shaped, it is especially suitable for drying flake, strip and granular materials with good air permeability, and for regular or irregular lumps such as filter cake paste materials (such as: coal, Charcoal briquettes, various mineral powders, food, vegetables, etc.) are more suitable.
The working principle of the mesh belt briquetting dryer is as follows: the briquettes enter the drying chamber through the feeding device and are placed on the mesh belt. The mesh belt is driven by a motor to continuously transport and bring the briquettes into the drying chamber. At the same time, hot air is sent into the drying chamber through the fan to exchange heat with the briquettes and evaporate the moisture in the briquettes. The dried briquettes are discharged from the equipment by the discharging device, completing the entire drying process.
| Model | Number of unit | Belt width(m) | Length of drying section(m) | Thickness of raw material(mm) | Operation temperature(°C) | Drying time(h) | Overall dimensions | ||
|---|---|---|---|---|---|---|---|---|---|
| L(m) | W(m) | H(m) | |||||||
| WDG1.0-6 | 1 | 1.0 | 6 | 10～40 | 30～200 | 0.1～1.0 | 8.5 | 2.1 | 2.1 |
| WDG1.0-8 | 2 | 8 | 10.5 | ||||||
| WDG1.5-8 | 2 | 1.5 | 8 | 30～100 | 50～300 | 0.2～2.5 | 11.8 | 3.1 | 4.1 |
| WDG1.5-12 | 3 | 12 | 15.8 | ||||||
| WDG1.5-16 | 4 | 16 | 19.8 | ||||||
| WDG1.5-20 | 5 | 20 | 23.8 | ||||||
| WDG1.5-24 | 6 | 24 | 27.8 | ||||||
| WDG2.0-9.0 | 2 | 2.0 | 9 | 30～200 | 80～350 | 0.5～3.0 | 12.8 | 3.6 | 4.1 |
| WDG2.0-13.5 | 3 | 13.5 | 17.4 | ||||||
| WDG2.0-18 | 4 | 18 | 21.8 | ||||||
| WDG2.0-22.5 | 5 | 22.5 | 26.4 | ||||||
| WDG2.0-27 | 6 | 27 | 30.8 | ||||||
| WDG2.0-31.5 | 7 | 31.5 | 35.4 | ||||||
Selling is not the end. True service has just begun.
We offer free exclusive customized production solutions with dedicated one-on-one technical support. Based on your specific needs, we provide professional layout planning and resolve all your concerns from the very beginning.
Our professional engineers arrive on-site to handle full equipment installation, commissioning, and debugging. We provide hands-on practical training and continuous guidance throughout the process, ensuring your equipment achieves rapid production ramp-up and runs smoothly and efficiently.
We provide a comprehensive one-stop after-sales service, including regular equipment inspections, daily maintenance, troubleshooting, and rapid response to any needs. Our goal is to ensure the long-term, stable, and efficient operation of your equipment.
Capable of carbonizing biomass with moisture content below 20% and particle size under 30mm, suitable for a wide range of common biomass types.
Produces high‑quality carbon with excellent carbonization rate. The resulting carbon products can be used not only as fuel, but also as raw materials for agricultural carbon, metallurgical carbon, and activated carbon.
Strong carbonization depth control capability. The residual volatile matter of the final charcoal can be precisely adjusted between 10‑25% according to different industrial requirements.
Enables adjustable carbonization depth and volatile content to meet varied industrial requirements while maintaining high carbonization efficiency.
From solution design to equipment manufacturing, and on-site installation and commissioning, we deliver comprehensive one-stop services. Our equipment has been successfully exported to over 100 countries and regions, including the UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, and many others. We look forward to partnering with you. Below are the project site of our valued clients.
