Focus on carbon equipment
As we all know, aluminum resources are in short supply. In our daily lives, most of the drinks and beers we drink are packed in drink cans. The smart boss discovered that as long as the paint on the surface of the can is removed, the recycled can can be further processed to obtain aluminum, and the profit margin is not small. So, what kind of equipment is used to remove paint from drink cans? What is its process principle? The editor will give you a brief introduction below.
Drink can paint stripping treatment equipment;
The paint on the surface of the can has an impact on the quality of the aluminum alloy. Traditional paint removal uses chemical agents. This method not only has a strong smell and is easy to harm human health, but also is very expensive. This can paint stripping furnace (also called a pyrolysis furnace) can not only quickly remove paint from the surface of cans, but is also smoke-free and odorless during the production process, meeting environmental requirements. It can also produce continuously and quickly 24 hours a day, and the output can be customized from 1 to 100 tons according to customer requirements.
Drink can paint stripping process;
First, the recycled used cans need to be broken into pieces of about 4CM, and then the paint removal furnace (pyrolysis furnace) needs to be preheated. The pyrolysis treatment temperature is approximately between 450-600 degrees. The cans are pyrolyzed and carbonized in an oxygen-free paint removal furnace at high temperatures. The paint on the surface of the cans is removed without damaging the aluminum can body. Generally, the cans can be discharged after staying in the pyrolysis furnace for 10-30 minutes. The obtained aluminum flakes can be further processed into crude aluminum ingots. Of course, bosses with financial strength can further process them into aluminum ingots.
Carbonizing machines are usually equipped with advanced temperature control systems that can achieve automatic temperature regulation. For example, the heat distributor can adjust the distribution of hot air flow during the operation of the carbonizing ma
The working principle of the carbonization machine is mainly to burn the material in a gasification furnace to produce flue gas. After the flue gas purification system filters out the wood tar smoke and other gas impurities, the flue gas is transmitted to
The vulnerable parts of the carbonizing machine (the carbonizing part of the charcoal machine can also be called the carbonizing machine) mainly include but are not limited to the following:
The yellow smoke (yellow smoke) produced during the carbonization process mainly comes from the thermal decomposition of raw materials, and contains organic compounds such as benzene, naphthalene, phenanthrene, phenol and derivatives, as well as harmful g