Focus on carbon equipment
In daily life, the use of charcoal has been very widespread. But how is charcoal made? How to make machine-made charcoal with a charcoal machine? How does charcoal work? This article will introduce it to you in detail.
Applicable materials for machine-made charcoal
The raw materials for machine-made charcoal include crop straws, peanut shells, rice husks, branches, sawdust, bamboo chips, scraps from lumber factories, etc. When the moisture content reaches between 5% and 12%, it can be made with a charcoal machine. The moisture content of peanut shells, rice husks, etc. is between 12% and 14%, so the carbon rods produced in this way are of the best quality.
Working performance of charcoal machine
1. The charcoal machine has a high degree of automation, large output, low price, low power consumption, simple operation and easy movement. If there is no electricity, a diesel engine can be used instead.
2. The material is highly adaptable and suitable for various biological processes. Straws ranging from powder to 60mm in length can be pressed with a moisture content of 5-12%.
3. Electric heating function, fully automatic electric heating device, can adjust the dryness and humidity of the material at will, solving the difficulty of preventing clogging and molding.
4. The automatic adjustment function of the propeller uses the principle of thrust spiral rotation to adjust the pressure angle, so that the material does not crowd into lumps and the machine becomes stuffy, ensuring the stability of discharging and molding.
5. It is simple to operate and easy to use, with improved automation and less labor. Only two people can operate it, saving time. You can use manual feeding or automatic feeding machine.
6. Process flow; crushing-drying-rod making-carbonization-finished product storage
Carbonizing machines are usually equipped with advanced temperature control systems that can achieve automatic temperature regulation. For example, the heat distributor can adjust the distribution of hot air flow during the operation of the carbonizing ma
The working principle of the carbonization machine is mainly to burn the material in a gasification furnace to produce flue gas. After the flue gas purification system filters out the wood tar smoke and other gas impurities, the flue gas is transmitted to
The vulnerable parts of the carbonizing machine (the carbonizing part of the charcoal machine can also be called the carbonizing machine) mainly include but are not limited to the following:
The yellow smoke (yellow smoke) produced during the carbonization process mainly comes from the thermal decomposition of raw materials, and contains organic compounds such as benzene, naphthalene, phenanthrene, phenol and derivatives, as well as harmful g