Focus on carbon equipment
Cotton stalk carbonization machine rationally adopts the advanced technology of recycling, purifying and circulating combustion of combustible gases such as carbon monoxide, methane and oxygen produced during the carbonization process of materials. That is to say, it solves the problem of environmental pollution caused by the thick smoke produced by ordinary carbonization machines in the carbonization project, and also solves the problem of heat energy required by the equipment, fully achieves self-sufficiency, improves the continuity and economy of equipment, and makes full use of agricultural and forestry surpluses. things, turning waste into treasure.
Cotton stalk carbonization equipment scope of application
The continuous carbonization function can carbonize a wide range of materials. The continuous carbonization function can process carbon-containing wood materials such as wood chips, rice husks, peanut shells, plants, bark, straw, organic matter, hemp stalks, walnut shells, coconut shells, palm shells, and sawdust. (Particulate with a diameter below 15mm) It is an ideal equipment for dry distillation, anaerobic carbonization and high carbonization rate under high temperature conditions in the carbonization machine.
Advantages of Cotton Stalk Continuous Carbonization Furnace
1. This equipment adopts an intelligent control system to save labor and move toward high efficiency/automation/intelligence development; 2. Break through the problem that traditional carbonization equipment cannot be continuously carbonized; intelligent continuous feeding|carbonization|continuous carbonization new technology; 3. Realize the production process of carbon/gas/oil/fertilizer co-production, which solves the traditional defects of high energy consumption/high pollution/low efficiency; 4. During the carbonization process, tar/wood vinegar and combustible gas can be automatically collected to achieve high efficiency of renewable energy use.
Carbonizing machines are usually equipped with advanced temperature control systems that can achieve automatic temperature regulation. For example, the heat distributor can adjust the distribution of hot air flow during the operation of the carbonizing ma
The working principle of the carbonization machine is mainly to burn the material in a gasification furnace to produce flue gas. After the flue gas purification system filters out the wood tar smoke and other gas impurities, the flue gas is transmitted to
The vulnerable parts of the carbonizing machine (the carbonizing part of the charcoal machine can also be called the carbonizing machine) mainly include but are not limited to the following:
The yellow smoke (yellow smoke) produced during the carbonization process mainly comes from the thermal decomposition of raw materials, and contains organic compounds such as benzene, naphthalene, phenanthrene, phenol and derivatives, as well as harmful g