Waste Materials High Temperature Pyrolysis Plant
Capacity
300-4500 kg/h
Heat Source
Diesel/Gas/Etc.
Customized
Yes
Capacity
300-4500 kg/h
Heat Source
Diesel/Gas/Etc.
Customized
Yes
Waste Materials are recycled and reused. Waste Materials are thin in texture and large in surface area. They are severely oxidized and burned during the smelting process, and the metal recovery rate is low. There is a paint layer on the surface, which has a certain impact on the quality of aluminum alloy. Direct melting and easy to produce flue gas pollution. After being collected by waste recyclers, waste stations, and waste companies, the shape of waste cans is destroyed. Some have been packed into blocks, which are difficult to separate and pre-treatment is difficult.
How to fully recycle cans, the key process is how to remove the paint. The continuous carbonization furnace for cans provided by our company achieves good results by removing paint through the carbonization process.
The packaged, compressed or flattened cans are first processed into fragments of about 4 cm by a shredder, and then added to the drum of the continuous carbonization furnace through a spiral feeder. Because the furnace is almost a closed space, it meets the anaerobic conditions, so that the cans are pyrolyzed and carbonized at a temperature of more than 400 degrees inside the carbonization furnace. The generated flue gas passes through the recovery pipeline, the flue gas purification system, and then to the burner to heat the main furnace, achieving the effect of reciprocating heating and carbonization. During the initial carbonization preheating, the surface paint of the cans begins to carbonize and pyrolyze, and the pyrolysis produces combustible gas to achieve normal combustion, gas circulation combustion and no flue gas discharge. The normal production state, finally obtaining pure aluminum.
| Model | Diameter(mm) | The drum length(m) | Carbon capacity(kg/h) | Drum speed(rpm) | Dimension(m) |
| DLTJ1010 | 1000 | 10 | 100-200 | 1.5-2.5 | 10.0*1.7*2.8 |
| DLTJ1210 | 1200 | 10 | 200-300 | 1.5-2.5 | 10.0*2.0*3.0 |
| DLTJ1410 | 1400 | 10 | 400-500 | 1.5-2.5 | 10.0*2.2*3.2 |
| DLTJ1612 | 1600 | 12 | 600-800 | 2.0-3.0 | 10.0*2.4*3.5 |
| DLTJ1912 | 1900 | 12 | 900-1100 | 2.0-3.0 | 12.0*2.8*3.8 |
| DLTJ2212 | 2200 | 12 | 1200-1500 | 2.0-3.0 | 12.0*3.2*4.2 |
| DLTJ2512 | 2500 | 12 | 1600-2000 | 2.0-3.0 | 12.0*3.5*4.5 |
| DLTJ3012 | 3000 | 12 | 2200-2600 | 2.0-3.0 | 12.0*4.0*5.0 |
| DLTJ3612 | 3600 | 12 | 3000-3800 | 2.0-3.0 | 12.0*4.6*5.6 |
Selling is not the end. True service has just begun.
We offer free exclusive customized production solutions with dedicated one-on-one technical support. Based on your specific needs, we provide professional layout planning and resolve all your concerns from the very beginning.
Our professional engineers arrive on-site to handle full equipment installation, commissioning, and debugging. We provide hands-on practical training and continuous guidance throughout the process, ensuring your equipment achieves rapid production ramp-up and runs smoothly and efficiently.
We provide a comprehensive one-stop after-sales service, including regular equipment inspections, daily maintenance, troubleshooting, and rapid response to any needs. Our goal is to ensure the long-term, stable, and efficient operation of your equipment.
Capable of carbonizing biomass with moisture content below 20% and particle size under 30mm, suitable for a wide range of common biomass types.
Produces high‑quality carbon with excellent carbonization rate. The resulting carbon products can be used not only as fuel, but also as raw materials for agricultural carbon, metallurgical carbon, and activated carbon.
Strong carbonization depth control capability. The residual volatile matter of the final charcoal can be precisely adjusted between 10‑25% according to different industrial requirements.
Enables adjustable carbonization depth and volatile content to meet varied industrial requirements while maintaining high carbonization efficiency.
From solution design to equipment manufacturing, and on-site installation and commissioning, we deliver comprehensive one-stop services. Our equipment has been successfully exported to over 100 countries and regions, including the UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, and many others. We look forward to partnering with you. Below are the project site of our valued clients.
